1.5TONSX300MM TWINS COILS MANDREL UN-COILER
详细说明
1.5TONSX300MM TWINS COILS MANDREL UN-COILER
If customization:Yes
Type:1.5TX300 Twin Coils Mandrel Un-Coiler
Overall Dimensions: 1500mm×1700mm×1700mm
Brand:Erudite roll forming
Technical Parameters
(1)1.5Tons Twin Coils Mandrel Un-Coiler | |
Load capacity | Max.1.5Tons |
Coil Inner-diameter | 510+/-30mm |
Coil outside-diameter | 1300mm |
Coil width | Max.300mm |
Drag off type (to fit with Max. Line speed of roll former 12-15mpm) | |
Manual Double Side Un-coiler The principle of operation of the Manual Twins Un-coiler is that, one side loaded with coil is working in the production line, and the operator can load new coil on to the other side at the same time. When the coil in the working side runs out, the operator is to depress the spring switch to loosen the pin and rotate un-coiler 180 degrees manually. After reach the correct position, the operator loosens the spring switch to fix the pin, and then the new coil can run into the production line immediately, which is to save the time to change coil and improve production efficiency. | |
(2)About us | |
Please visit the web site: www.eruditemachinery.com for detailed information |
Below pictures for your reference only